Clean Fluid Solutions is a program that cleans lubricant reservoirs. Although our goal is usually to save the product, there are some cases that call for a flush, clean, and refill. When oil becomes contaminated by water, dust, dirt or other foreign debris, it can cause lots of different types of problems for your motor and, depending on the type of contamination and the extent of the problem, our team will use one of several different flushing techniques.

The first thing that we will need to do with your engine is to evaluate the cause of your lubrication system’s failure. 

We’ll check to see:

1. Is your oil degraded and has the filter failed? 
2. Is the oil-contaminated? 
   • If the oil is contaminated was mixed with the wrong additives or other lubricants?
   • Or was it contaminated by dust, dirt or water, etc.?
3. And finally, is there microbial growth further contaminating the oil?

All of these are problematic and can restrict the flow of oil through your engine and cause more damage to your system. Some are faster and easier to fix than others.

There are a lot of flushing options that our team can use clean out your lube system, once we know what caused your problem, we can use:

•       High Flush Oil Temperature
•       Cycle Flush-Oil Temperature
•       Pulsating Oil Flow
•       Reverse Oil Flow
•       Mechanical Cleaning
•       Drawdown Filtration or Separation
•       Wand Flush Tool
•       High Turbulence, High Fluid Velocity, Low Oil Viscosity
•       Electrostatic (Charged Particle) Separators
•       Detergent or Solvent Flush
•       Chemical Cleaning

Whether we’re forcing pressurized chemicals or hot oil through your system, or just scrubbing parts down with scrapers brushes and ultrasonic baths, we will make sure that when our work is done, your equipment will be working properly again.

For more information on what we can do for you, contact us today and set up your lube system screening and flushing today.

If you have any diesel fuel or oil stored in tanks for any amount of time, you have some sort of contamination – guaranteed!  Reliability on your machines and equipment is critical for any business, spending money on repairs and replacement parts such as injectors and filters can add up quickly.

Mission critical facilities such as hospitals and communication centers often rely on diesel generators to carry the electrical load in emergency situations. Will your generator be up to the task?

Contact us now to run an analysis on your systems!